1. SIMONSWERK - It all hinges on excellence.
  2. Technical information
  3. Adjustment instructions

Adjustment instructions

Adjustment instructions

Adjustment

All adjustments made to hinges require due care. The specified adjustment paths must be strictly adhered to. If the adjustment is overtightened, the system will generally only function to a limited extent. Please ensure that any noticeable resistance is not overcome by applying additional force.

Adjustment instructions

Zero position

SIMONSWERK hinges are pre-assembled in a zero position at the factory. After installing and making any necessary adjustments, all clamping screws must be firmly tightened.

Adjustment instructions

Tool

Adjustments must be made with a proper tool to avoid overtightening the screw inserts, e.g. Allen keys with ball heads are not suitable.

Adjustment instructions

Convenient adjustment

When dealing heavy doors and doors with unfavourable height/side ratios, the adjustment technology must be supported by relieving the load on the door leaf, even with convenient adjustment.

Adjustment instructions

Stress-relieved

All adjustments must be made free of stress, both within the hinge and in relation to the whole door. This means that adjustments must be made evenly so that the hinges are aligned both individually, and altogether on the door.